Product presentation

Fun To Do offers you this set of excellent quality pigments. The fineness of the particles ensures an exceptional structure to the product.
The four colors of the set allow you to reproduce any shade of the rainbow.
4 ml of pigment per liter of resin is an adequate dosage.

Contents of the pack:

20 ml of blue pigment
20 ml of red pigment
20 ml of yellow pigment
20 ml of black pigment

Use :
Add a few drops of pigment to the resin, mix everything, add pigment until the desired result is obtained.

Precautions:
Take care not to spill any pigment, stains are very difficult to remove.
It is therefore advisable to wear gloves.

About Fun To Do resins

All Fun To Do resins are designed to be super fast!
Cure times of 0.5 seconds for 0.02 mm layers are easily achieved on standard DLP printers with a light source of approximately 240 Watts.

A wide range of responsiveness!
Resins Fun To Do have a very wide range of reactivity, it extends from very short wavelengths of 225 nm to wavelengths close to the visible of 420 nm.
By incorporating a very good mix of photoinitiators and sensitizers, almost any light source can be used to initiate the polymerization process of our resins.
No need to modify your DLP projector.
Do you have an SLA laser machine, or perhaps a DLP printer with an LED lighting source? As long as the wavelength is between 225nm and 415nm, it will work, and it will work fast!
Besides the wavelength of the light source, several other factors are important, so please consult our product sheets. If you have any doubts about the compatibility of your machine with our resins, simply send us an email.

Fun To Do resins have very low shrinkage!
Where 3.5% is considered a low shrinkage, we have limited it to 0.5%.
It's basically what you see is what you get.
3.5% seems to be small but if you take a 10cm object, 3.5% is 3.5mm (which is almost half a centimeter!) It's huge compared to the 0.5mm that resins Fun To Do reach.

Natural resistance to water and most chemicals!
Fun To Do resins have a natural resistance against water.
In liquid form they are highly hydrophobic.
Once fully cured, there are virtually no chemicals that can dissolve them.
In our tests, printed parts have withstood the elements and various chemicals for several years!
To see which chemicals were tested, scroll further down.

Friendliness makes you want to build more!
When designing resins, Fun To Do has devoted a lot of effort to making the resin as user-friendly as possible. These efforts have resulted in a series of low-odor resins with minimal skin irritation.

Fun To Do resins are affordable and allow you to build more!
Using resins FunToDo , you can afford to experiment, expand your knowledge about media, exposure times, material thickness without having to think about material costs all the time.

Chemical resistance
FunToDo resins have been tested with a wide range of chemicals: