Introduction
The Anycubic Texture Resin is specially designed to provide unique surface effects to your 3D prints, offering a more realistic and detailed finish. Ideal for modeling, figurines, and decorative objects, this resin allows you to create fine textures, grain, and subtle reliefs, adding a new dimension to your creations.
Texture Resin Range
Other Anycubic Resin Ranges
Product Features
✅ Built-in textured effect : Allows you to achieve prints with grainy or raised surfaces without complex post-processing.
✅ High precision : Perfectly captures the smallest details for an ultra-realistic finish.
✅ Excellent adhesion : Ensures good grip on the print bed, reducing failures.
✅ Optimized curing : Formulated for balanced exposure time, ensuring finesse and strength.
✅ 405 nm compatible : Works with most LCD, SLA, and DLP printers, such as Anycubic Photon, M3, M5, Mono X, etc.
Ideal Applications
🎨 Modeling and figurines – Add realism to characters, scenery, and accessories.
🏺 Decorative objects – Create artistic pieces with original textures.
🔬 Prototypes and design – Experiment with different finishes without complex post-processing.
🦾 Technical parts with improved grip – Perfect for parts requiring a rough surface for better handling.
Resin Parameters
| UV Wavelength | 365-405nm | Elongation at break | 14-18% |
|---|---|---|---|
| Density | 1.08-1.11g/cm³ | Hardness | 82HD |
| Lower exposure time | 20-40s | Tensile strength | 64-83 MPa |
| Viscosity | 75-85cPimpPa.s | Resin cleaning | Alcohol |
| Flexural strength | 52-65 MPa | Flexural modulus | 2040-2600 MPa |
| Normal exposure time | 1.8-3s | Shelf life | 1.5 years |
Printing Parameter Recommendations
| Printer model | Layer thickness | Exposure time | Off time | Lower exposure time | Bottom layer | Anti-aliasing level | Z lift distance | Z lift speed | Z retract speed |
| Photon Mono M7 Pro | 0.05mm | 2s | 1s | 25s | 4 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono M5s Pro | 0.05mm | 3.6s | 1s | 30s | 5 | 1 | 8mm | 6mm/s | 6m/s |
| Photon Mono M5s | 0.05mm | 2.8s | 1s | 30s | 5 | 1 | 8mm | 5mm/s | 6mm/s |
| Photon Mono M5 | 0.05mm | 2.8s | 1s | 30s | 5 | 1 | 8mm | 5mm/s | 6mm/s |
| Photon M3 Max | 0.05mm | 3s | 2s | 35s | 6 | 1 | 10mm | 4mm/s | 4mm/s |
| Photon Mono X 6Ks | 0.05mm | 2.5s | 1s | 20s | 5 | 1 | 8mm | 3mm/s | 4mm/s |
| Photon Mono X2 | 0.05mm | 2.5s | 1s | 25s | 5 | 1 | 8mm | 4mm/s | 4mm/s |
| Photon Mono 2 | 0.05mm | 2.5s | 1s | 25s | 5 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon D2 | 0.05mm | 2.5s | 1s | 28s | 5 | 1 | 5mm | 2mm/s | 3mm/s |
| Photon M3 Premium | 0.05mm | 1s | 0.5s | 35s | 5 | 1 | 8mm | 6mm/s | 6mm/s |
| Photon Mono 4K | 0.05mm | 2s | 1s | 40s | 6 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon Mono X 6K | 0.0.5mm | 2s | 1s | 30s | 6 | 1 | 8mm | 2mm/s | 3mm/s |
| Photon M7 | 0.05mm | 2.2s | 0.5s | 25s | 4 | 1 | 8mm | 6mm/s | 6mm/s |
Recommendation
For your safety, we recommend using gloves and a spatula when handling this product.
For cleaning your parts, prefer the product Resinaway or isopropyl alcohol.
Precautions
- The ideal storage conditions for unpolymerized resin are a cool, dark place at room temperature, protected from light, avoiding high temperatures or sunlight.
- The suggested operating temperature is 18 to 35 °C. Too low a temperature may affect the printing effect; the resin can therefore be properly preheated before use (no more than 60 °C).
- If the resin pigment settles, it can be used after stirring or shaking.
- To ensure resin performance, please remove the model promptly after cleaning to avoid prolonged soaking in water.
- To guarantee the mechanical properties of the model, please perform post-curing after cleaning and drying.
- To ensure ideal performance of the curable material, it is necessary to control the intensity and duration of the light source after curing:
(1) The intensity of the mercury lamp or LED light source is 5 to 10 mW/m² and the duration does not exceed one hour (self-regulation);
(2) Sun exposure time (summer) is about 1 hour;
(3) Proximity or prolonged exposure to intense light sources, such as high-pressure mercury lamps, is prohibited.
(4) It is recommended to print in a dark room or cover with a lid during printing, as the resin is a photosensitive material.