Introduction
The resin High Speed 2.0 from Anycubic is specially designed to speed up your 3D prints while maintaining exceptional precision. Thanks to an optimized formulation, this resin significantly reduces the curing time of each layer, allowing for faster prints without compromising quality or strength.
The High Speed 2.0 Range
Other Anycubic Resin Ranges
Product Features
✅ Optimized printing speed : Reduced exposure time for prints up to 3× faster.
✅ High precision : Sharp details and smooth surfaces, even at high speed.
✅ Excellent adhesion : Reduced print failures thanks to better bed adhesion.
✅ Even curing : Ensures uniform solidification to prevent warping.
✅ Low shrinkage : Guarantees dimensionally accurate parts, even on complex models.
✅ 405 nm compatible : Works with most resin printers LCD, SLA, and DLP, including Anycubic Photon Mono, M3, M5, and many others.
Ideal Applications
🚀 Rapid prototyping – Perfect for quickly producing test models.
🎨 Model making and figurines – Captures the finest details with flawless finish.
🏭 Mass production – Ideal for those printing many parts in minimal time.
🔬 Technical and industrial parts – Suitable for prints requiring speed and precision.
Resin Parameters
| UV Wavelength | 365-405nm | Elongation at break | 16-20% |
|---|---|---|---|
| Density | 1.145g/cm³ | Heat deflection temperature | 60-65℃ |
| Lower exposure time | 15-25s | Tensile strength | 37-47 MPa |
| Viscosity | 75-85cPimpPa.s | Resin cleaning | Alcohol |
| Flexural strength | 52-65 MPa | Flexural modulus | 1700-3300 MPa |
| Normal exposure time | 1.5-2.8s | Shelf life | 1.5 years |
Printing Parameter Recommendations
| Printer model | Layer thickness | Exposure time | Off time | Lower exposure time | Bottom layers | Anti-aliasing level | Z lift distance | Z lift speed | Z retract speed |
| Photon Mono M7 Pro | 0.1mm | 1.4s | 0.5s | 15s | 3 | 1 | 4mm | 15mm/s | 15mm/s |
| Photon Mono M5s Pro | 0.1mm | 1.9s | 0.5s | 15s | 5 | 1 | 3mm | 20mm/s | 20m/s |
| Photon Mono M5s | 0.1mm | 1.9s | 0.5s | 15s | 5 | 1 | 3mm | 20mm/s | 20mm/s |
| Photon Mono M5 | 0.1mm | 2s | 0.5s | 15s | 5 | 1 | 5mm | 6mm/s | 6mm/s |
| Photon M3 Max | 0.1mm | 2.8s | 0.5s | 25s | 6 | 1 | 8mm | 4mm/s | 4mm/s |
| Photon Mono X 6Ks | 0.1mm | 2.5s | 0.5s | 15s | 5 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon Mono X2 | 0.1mm | 2.5s | 0.5s | 18s | 5 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon Mono 2 | 0.1mm | 2.5s | 0.5s | 18s | 5 | 1 | 5mm | 4mm/s | 6mm/s |
| Photon D2 | 0.1mm | 2.5s | 0.5s | 18s | 5 | 1 | 5mm | 2mm/s | 3mm/s |
| Photon M3 Plus | 0.1mm | 1.5s | 0.5s | 18s | 6 | 1 | 6mm | 6mm/s | 6mm/s |
| Photon M3 | 0.1mm | 2s | 0.5s | 18s | 5 | 1 | 5mm | 4mm/s | 6mm/s |
| Photon M3 Premium | 0.1mm | 2.5s | 0.5s | 25s | 5 | 1 | 6mm | 6mm/s | 6mm/s |
| Photon Mono 4K | 0.1mm | 2s | 0.5s | 25s | 6 | 1 | 5mm | 4mm/s | 6mm/s |
| Photon Mono X 6K | 0.1mm | 2s | 0.5s | 18s | 6 | 1 | 6mm | 4mm/s | 6mm/s |
| Photon X 6K | 0.1mm | 2s | 0.5s | 25s | 5 | 1 | 6mm | 6mm/s | 6mm/s |
Recommendation
For your safety, we recommend using gloves and a spatula when handling this product.
For cleaning your parts, prefer the product Resinaway or isopropyl alcohol.
Precautions
- Ideal storage conditions for unpolymerized resin are a cool, dark place at room temperature and away from light, avoiding high temperatures or sunlight.
- Suggested operating temperature is 18 to 35 °C. Too low a temperature may affect print quality; resin can be properly preheated before use (no more than 60 °C).
- If resin pigment settles, it can be used after stirring or shaking.
- To ensure resin performance, please remove the model promptly after cleaning to avoid prolonged soaking in water.
- To guarantee mechanical properties of the model, please perform post-curing after cleaning and drying.
- To ensure ideal performance of the curable material, it is necessary to control the intensity and duration of the light source after curing:
(1) The intensity of the mercury lamp or LED light source is 5 to 10 mW/m² and duration does not exceed one hour (self-regulation);
(2) Sun exposure time (summer) is about 1 hour;
(3) Proximity or prolonged exposure to intense light sources, such as high-pressure mercury lamps, is prohibited.
(4) It is recommended to print in a dark room or cover with a lid during printing, as resin is a photosensitive material.