User manual (English)
1. How to insert the D6 data cable into the extruder? (English)
2. How to tighten the locking bolt between the drive system and the nozzle? (English)
3. How to eliminate Aka sound from X and Y axis bearing bracket? (English)
4. How does a Wanhao Duplicator 6 printer work and print a rhino? (English)
5. How to add rubber feet with Wanhao Duplicator 6? (English)
6. How to unclog WANHAO D6 MK11 extruder? (English)
7. How to disassemble the MK11 extruder? (English)
8. How to repair D6 heating panel and keep heating non-stop? (English)
9. How to repair broken D6 heater board thermistor? (English)
10. How to fix warning message D6 “error stopped, tem sensor”? (English)
11. How to fix warning message D6 “error stopped, Z switch broken”? (English)
12. How to replace the D6 lateral plain bearing? (English)
13. How to disassemble the D6 platform? (English)
14. How to assemble the D6 platform? (English)
15. How to reconnect the yellow data cable of D6 OLED display? (English)
16. What is the opinion on D6 from a third party? (English)
17. How to eliminate strings by adjusting retraction? (English)
18. How to make a perfect first coat? (English)
19. How to fix the filament breakage inside the extruder (quantity block)? (English)
20. How to do a bypass on the D6 motherboard? (English)
21. How to use D6 automatic and manual bed leveling? (English)
22. Replacing the blue ABL sensor with an orange sensor.(English)
23. Installation guide for insulating covers (English)
D6_Insulate_cover_Installation_Guidance_REV_A