Product Presentation

Fun To Do has developed this resin for an ultra high-end finish.

Specifically designed to get the best out of your DLP / SLA machine, the carbon nanoparticles allow you to print objects at the highest resolutions with a more matte finish.

Curing times are similar to any other resinFun To Do.
Its exceptional resolution therefore does not limit its use to Top Down design printers.

Product Features

About Fun To Do resins

All Fun To Do resins are designed to be ultra fast!
Curing times of 0.5 seconds for 0.02 mm layers are easily achieved on standard DLP printers with a light source of about 240 Watts.

A wide range of reactivity!
Fun To Do resins have a very wide range of reactivity, extending from very short wavelengths of 225 nm to wavelengths close to visible light at 415 nm. By incorporating a very good mix of photo-initiators and sensitizers, almost any light source can be used to initiate the polymerization process of our resins. 
No need to modify your DLP projector. 
Do you have an SLA laser machine, or maybe a DLP printer with an LED light source? As long as the wavelength is between 225nm and 415nm, it will work, and it will work fast! 
Besides the wavelength of the light source, several other factors are important, so please consult our product datasheets.
If you have doubts about the compatibility of your machine with our resins, just send us an email. Fun To Do resins have very low shrinkage!

Where 3.5% is considered low shrinkage, we have limited it to 0.5%.
Basically, what you see is what you get.
3.5% seems small but if you take a 10 cm object, 3.5% is 3.5 mm (which is almost half a centimeter!) That’s huge compared to the 0.5mm that 
Fun To Do resins achieve. A natural resistance to water and most chemicals!

Fun To Do
resins have a natural resistance to water.In liquid form they are highly hydrophobic. Once fully cured, there is practically no chemical capable of dissolving them.
In our tests, printed parts have withstood elements and various chemicals for several years! 
To see which chemicals have been tested, scroll down. 
User-friendliness makes you want to build more! 
When designing the resins,

Fun To Do
put a lot of effort into making the resin as user-friendly as possible. These efforts resulted in a series of low-odor resins with minimal skin irritation. Fun To Do resins are affordable and let you build more! By using

Fun To Do
resins, you can afford to experiment, expand your knowledge on supports, exposure times, material thickness without always having to think about material costs. Chemical resistanceFun To Do

resins have been tested with a wide range of chemicals:
White SpiritAlcohol / Ethanol Thinner

• Hydrochloric acid and various other acids
• Sulfuric acid
• Acetone
• Gasoline
• Isobutanol
• Xylene
• Lamp oil / Engine oil / Olive oil / Brake fluid
• Water
• This list, not exhaustive, is always expanding: each new chemical is tested by immersing a printed part for a week or two.
• For your safety Wanhao France recommends handling this product with
• gloves

and a

spatulagloves and a spatula.