DENTIFIX MODELING LR (Low reactive) FunToDo LCD/DLP SAND color

The Dentifix resin was created following collaboration with dental prosthetists in Europe and the company FunToDo (a company specializing in resin manufacturing for 3D printers). It was then validated in France for dental model applications by the Dentifix laboratory. ORTHESYST orthodontics led by Mr. LAURENT MUNEROT (President of UNPPD)

It is from this incredible union that DENTIFIX Modeling Sable resin was designed. The most affordable dental model resin on the market and the closest to traditional plaster!

This resin is perfect for impressions related to dental applications (dental models, alignment, retaining splint, mid or half dental arch, crowns, Dies, bridges etc.) it can be used for all others applications requiring high model accuracy.

This resin is also highly suitable for printing figurines and sculptures or any other object requiring a smooth surface. The touch of this resin is very pleasant and resembles silk. It also has the particularity of self-smoothing layer after layer.

• Precision : Dentifix-3D modeling LR Formlabs resin makes it possible to print models with a very high level of detail and a precision of up to 35 microns in Z

• Smooth surface : With a smooth surface and an almost matte and opaque color, Dentifix-3D modeling HR resin is similar to traditional hard plasters

• A color : carefully defined by dental technicians for more efficient work on your models with less fatigue for your eyes and faster work! Working on a Dentifix GRAY dental model is more pleasant than working with your traditional plaster. Its Matte color brings out the details so it is easier to work on your models.

Some explanations :

The idea was to create a high-performance and affordable dental model resin!!
The color of this resin has been validated by dental technicians to bring out details and facilitate laboratory work. Laboratory light can seriously strain the eyes when it is reflected on the model during the creation of your dental orthoses (gutter, ELN, circuit breaker, etc.).

The surface condition of this resin is very smooth after printing and its hardness allows it to take very important angles to optimize the printing quality and limit failures when printing dental models. It is hard but flexible at the same time which allows you to scrape your models like plaster.

You could obviously create your dental alignment models with this resin.

This resin is compatible with FORMLABS SLA laser printers or equivalent

Dentifix-3D Modeling product property:

Although the properties in this table are accurate, Dentifix-3D cannot give any guarantee, explicit or implicit, as to the accuracy of the properties obtained through the use of this product.
Product properties may change without notice.

For your safety Wanhao France recommends handling this product with gloves and a spatula .