KMD DENTAL resin for DLP/LCD printers

Dental model resin that works with 405nm LCD printers such as SLASH and SLASH+ , Wanhao Duplicator 7, 3DS Project 1200, Miicraft, Micromake L2, X-Cube, Xayav V, Moonray, Asiga, 3DS Project 1200, Kudo Titan 2, Miicraft, Ember ...

This resin is made from nanoceramic which gives it low shrinkage capacity and a very precise finish. It is ideal for printing micro-incisions and micro-reliefs. Watermarks can reach a minimum thickness of up to 0.2 mm.

Application :

It is a resin for professional use. It is particularly applied in the dental field for fixed and removable prostheses. This resin is 30% more precise than DENTIFIX resin.

The impressions from this resin serve as dental impressions in order to create your crown and bridges on a precise model.

Security :

The toxic substance content is greatly reduced or almost non-existent. In fact, this resin does not contain any solvent and the phosphorus and irritant substance contents are very low. This product is not irritable but it is strongly recommended to protect yourself when handling it. Keep out of reach of children.

Wanhao France recommends handling this product with gloves and a spatula .

Post-printing:

Cleaning of prints can be done by soaking or spraying with 70% or 99% denatured alcohol (IPA) or 70% - 99% ethyl alcohol. As the risk of deformation in post-printing is very low, passing through a UV chamber is not essential. If you want to cure the part in a UV chamber , the passage must be very rapid.